Set RAID 0 with UEFI boot for EAX-C236KP

Document NO.

2023103109
Category

Software BIOS
Update Date

2023-11-02
Rev.

A1

Export PDF

Model Name

EAX-C236KP

Purpose

To set RAID 0 on Intel Kaby Lake platform, example board is EAX-C236KP. There are two operating parts to set a RAID 0 for EXA-C236KP.
Step 1: Enabled Intel Rapid Storage Technology on BIOS Setup.
Step 2: Start to set RAID 0.

Environment:

Model: EAX-C236KP-B1R (Current Latest BIOS Revision: AKBX-00D.bin)
BIOS Boot mode settings: UEFI Boot (Default)
Storage: Innodisk 3TE7 128GB SATA storage *2
Operating System: Windows 10 IoT Enterprise 2021 LTSC 64bit English

Note: Use same brand / model and size of your storage device to create a RAID volume is strongly recommended.
Refer to S17020

Step 1: Enabled Intel Rapid Storage Technology on BIOS Setup

1. Attach SATA storage devices to SATA port of the board.
2. Press DEL / F2 at POST to enter BIOS, switch to "Chipset" tab and open "PCH-IO Configuration".

3. Open "SATA And RST Configuration".

4. Choose "SATA Mode Selection", then change to "RAID".

5. Switch to "Save & Exit" tab, save changed setting and reset.

Step 2: Start to set RAID 0

6. Enter BIOS again, "Intel Rapid Storage Technology" menu will enabled from "Advanced" tab.

7. Enter "Intel Rapid Storage Technology" menu and select "Create RAID Volume" to change RAID setting.
Note: RAID management function will disable while only single SATA storage device attached to the board.

8. Set RAID Level as RAID0(Stripe).

9. To select two SATA storage devices then select "Create Volume".

10. Switch to "Save & Exit" tab, save changed setting and reset.

Support