VMS-APL
Intel® Pentium®/Celeron®/Atom™ Processor Fanless Vehicle Telematics System
- Intel® Pentium®/Celeron®/Atom™ Processor
- One 204-pin SODIMM Socket Up to 8GB DDR3L 1866MHz SDRAM
- Rich I/O, 1-DP, 1-LVDS, 1-DC-Out, 1-8-bit GPIO, 2-Line-out, 2-Mic-in, 2-LAN, 2-COM, 4-USB
- Onboard u-box M8N concurrent GNS module (GPS/QZSS, GLONASS, BeiDou)
- Rugged Fanless Design Compliant with MIL-STD-810G
- Power Management and Low Voltage Protection Design
- Wake on RTC/SMS Via WWAN Module
- Optional CAN modules supports OBD II, SAE J1939 or J1708
- Wide Range DC Power Input from 9 ~ 36V
- Fanless Operating from -20/40 ~ 70°C
- Supports TPM 1.2/2.0 (Factory Option), SD card(SD 3.0)
仕様
System Information
-
Processor
Intel® Pentium® Processor N4200 (2M Cache, up to 2.5 GHz)
Intel® Celeron® Processor N3350 (2M Cache, up to 2.4 GHz)
Intel® Celeron® Processor J3455 (2M Cache, up to 2.3 GHz)
Intel Atom® x7-E3950 Processor (2M Cache, up to 2.00 GHz)
Intel Atom® x5-E3940 Processor (2M Cache, up to 1.80 GHz)
Intel Atom® x5-E3930 Processor (2M Cache, up to 1.80 GHz) -
System Memory
1 x 204-Pin DDR3L 1866MHz SO-DIMM up to 8 GB
-
Watchdog Timer
H/W Reset, 1sec. ~ 65535sec.
-
H/W Status Monitor
Monitoring CPU & System Temperature and Voltage
-
SBC
EBM-APLV
Expansion
-
mPCIe
2 x Mini-PCIe socket (PCIe + USB) for WLAN / WWAN option (w/ SIM Slot)
-
IET
1 x Avalue 80-Pin IET Interface (1 x DP, 4 x PCIex1, 3 x USB2.0, 1 x LPC, 1 x Line-Out(R/L), 1 x SMBus)
-
Expansion
1 x CANBus module Interface (UART), supports OBDII, SAE J1939/J1708 (Factory Option)
Storage
-
M.2
1 x M.2 Key-B 2242, support SATA III
-
2.5 Drive Bay
1 x 2.5" Drive Bay (SATA III)
-
MicroSD Card
1 x SD (3.0)
Front I/O
-
USB
2 x USB 3.0
-
Power Button
1 x Push Button for Power on/off
-
Reset Button
1 x Push Button for Reset
-
LED Indicator
1 x Power LED (Blue)
1 x Storage LED (Yellow)
1 x WLAN LED (Green)
1 x WWAN LED (Green) -
Audio
1 x Mic-In, 1 x Line-Out
-
SIM Slot
2 x SIM Card Slots (External Accessible)
-
Digital I/O
1 x 8-Bit GPIO
(Digital Input)
Input Voltage (Internal Type): 5VDC TTL (default)
Input Voltage (Source Type): 0~30 VDC
(Digital Output)
Digital Output (Sink Type): 5VDC TTL (default), max current: 20mA
Digital Output (Source Type): 0~30VDC, max current: 250mA
Rear I/O
-
USB
2 x USB 3.0
-
COM Port
2 x RS-232/422/485 (Jumper)
-
LAN Port
2 x RJ-45
-
CAN Bus
CANbus modules supports OBDII, SAE J1939/J1708 (Factory Option)
-
Audio
1 x Mic-In, 1 x Line-Out
-
DP
1 x DP
-
LVDS
1 x LVDS
-
Antenna
5 x Antenna Mounting with Dust Cover
-
AC/DC Input
3-Pin Terminal Block
-
DC Output
2-Pin Terminal Block
GPS
-
Chipset
Onboard u-blox NEO-M8N module supports GPS/ Gloness/ QZSS/ Galileo/ Beidou
-
Sensitivity
Industry leading –167 dBm navigation sensitivity Product variants to meet performance and cost requirements Combines low power consumption and high sensitivity
Display
-
Graphic Chipset
Processor Graphics
Intel® HD Graphics 505 (N4200, E3950)
Intel® HD Graphics 500 (E3950, E3940, E3930) -
Resolution
DP: Max. Resolution 4096x2160 @ 60Hz
LVDS: Max. Resolution 1920x1200 @ 60Hz
Audio
-
Audio Codec
Realtek ALC888S
supports 2.1-CH
Ethernet
-
LAN Chipset
2 x Intel® I211AT
-
Specification
10/100/1000 Base-Tx GbE compatible
Power Requirement
-
Voltage Input Spec.
Typical 12/24 Vdc ( +9~ 36V )
-
Voltage Input Connector
3-Pin Terminal Block
-
DC Output Spec.
12Vdc/6A
-
DC Output Connector
2-Pin Terminal Block
-
ACPI
Single Power ATX Support S0, S3, S4, S5
ACPI 5.0 Compliant -
Power Mode
Vehicle Power Mode (Default Setting)
Industrial PC Power Mode supports AT/ATX
Software Support
-
OS
Win 10, Linux
Android (by request)
Certification
-
Certification Information
CE, FCC Class B, e13 Mark, ISO7637-2, IP50 Rating
Mechanical & Environmental
-
Operating Temp.
N4200/ N3350/J3455
With extended temperature peripherals: -20°C ~ 70°C (-4°F ~ 158°F) with air flow
E3950/ E3940/ E3930
With extended temperature peripherals: -40°C ~ 70°C (-40°F ~ 158°F) with air flow -
Storage Temp.
-30°C ~ 70°C (-22°F ~ 158°F)
-
Operating Humidity
40°C @ 95% Relative Humidity, Non-condensing
-
Dimension (W x L x H)
239mm x 186mm x 62mm
-
Weight
2.6kg (system)
3.2kg (w/package) -
Vibration Test
Operating with SSD : MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
Storage with SSD : MIL-STD-810G, Method 514.6, Category 24, minimum integrity test -
Shock Test
Operating with SSD : MIL-STD-810G, Method 516.6, Procedure I, functional shock=20G
Non-Operating with SSD : MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75G -
Mounting Kit
Wall Mount kit (Standard)
Ordering Information
-
Ordering Information
Intel® Apollo Lake Pentium®/Celeron® Processor Fanless Vehicle Telematics System
VMS-APL-N42-B1-1R (N4200)
VMS-APL-N33-B1-1R (N3350)
VMS-APL-J34-B1-1R (J3455)
VMS-APL-E50-B1-1R (E3950)
VMS-APL-E40-B1-1R (E3940)
VMS-APL-E30-B1-1R (E3930)