About to Logout
Are you sure you want to log out?
NEW
RIM-OOBM
Monitor, remediate remotely and reduce downtime Effectively complete group maintenance
- Remote control for Power switch on/off & reset
- Device management via cloud
- Nuvoton NUC980 microprocessor embedded
- Low power consumption
- Built-in Allxon Out-Of-Band (OOB) service agent
ProductSpecification
Specifications
-
MCU
Nuvoton NUC980DR63YC 64-pin LQFP Package
-
SDRAM
Built-in 64MB DDR2 SDRAM Memory in LQFP package
-
SRAM
Up to 16 KB on-chip SRAM
-
Cache
Built-in 16 KB instruction cache and 16 KB data cache
Onboard I/O
-
LAN
1 x 10 / 100 Mbps RJ45
I/O Interface (SOM)
-
Power Button
4x 2p 2.0mm pitch wafer connector
-
GPIO/I2C
4x 2p 2.0mm pitch wafer connector
-
DC in
1x 2p 2.0mm pitch wafer connector
-
USB OTG
1 x Micro USB
-
Factory Reset Button
1 x Reset Button
-
System Reset
1 x Reset Button
-
LED Indicator Light
LED1 MCU Activated (Green)
LED2 Allxon Service Activated (Green)
Mechanical & Environmental Specification
-
Power Requirement
DC 5V / 1A stand by power
-
Power Mode
AT
-
Operating Temp.
-40°C ~ 85°C (-40°F ~ 185°F)
-
Storage Temp.
-40°C ~ 85°C (-40°F ~ 185°F)
-
Operating Humidity
40°C @ 95% Relative Humidity, Non-condensing
-
Size (L x W)
35 x 55 x 15.14 mm (without bracket)
-
Weight
18g
-
Vibration Test
1.5Grms, IEC 60068-2-64, Random, 5 ~ 500Hz, 30min/Axis, 3 Axis
-
Shock Test
10G, IEC 60068-2-27, Half Sine, 11ms, Z Axis
-
Drop Test
ISTA 2A, IEC-60068-2-32 Test : Ed, 1 Corner, 3 Edges, 6 Faces
-
OS Information
Linux ARM64: Jetson L4T 32.3.1 and above (with Ubuntu 18.04 and 20.04)
Linux X86: Ubuntu 18.04, 20.04, 22.04
Windows 10
Ordering Information
-
Ordering Information
RIM-OOBM
There is no result.
Please readjust your filters.
RelatedFAQ
Update Date
Category
Title
More
2023-10-26
SoftwareApplication
To use RU and RW tool check RTC function
2023-10-26
SoftwareOS
How addition SNMP in Windows 10
2023-09-20
SoftwareBIOS
Update BIOS on Windows OS
2023-09-20
SoftwareDriver
How to make Avalue Board support Wake On LAN (WOL) Function
2023-09-20
GeneralPower
How to use “Power ON after power failure function” to boot system without press Power button.
1
2
Added to compare.
Check now!
My Avalue
Join our membership to access webinars covering topics from healthcare to industrial manufacturing.
Contact Us
If you have any questions, feel free to contact us. We will get back to you as soon as possible.
Subscribe
Welcome to subscribe to our e-newsletter. As long as enter your email, you can get first-hand latest news.
Subscribe Subject
Press Release
E-letter
IR News
White Paper
Unsubscribe
If you decide to unsubscribe from the newsletter, please enter your email below. We will cancel all subscription topics.
Unsubscribe Subject
Press Release
E-letter
IR News
White Paper